pH Calculator

H+, Ionization Constant, and Concentration

What is pH? 

It’s a standard of the concentration of hydrogen ions in water or how acidic or basic it is if the pH scale ranges from 0 to 14, with values under 7 indicating acidity and values over seven showing alkalinities. 

If the solution has a low pH (less than 7), then the solution will have more hydroxyl ions present. 

If your solution has a high pH (higher than 7), it will be more difficult for calcium carbonates to dissolve in it. 

This calculator can help you determine the approximate value of either H+, ionization constant, or concentration when given two other measurements!

pH Calculator is an amazing online class help tool for students studying chemistry. 

What is pH Scale?

If you’re interested in the chemistry behind it, pH is a measure of how acidic or basic something is. A pH below 7 indicates acidity; a value between 7 and 14 indicates base-level solutions (alkalinity); and anything above 7 can be described as neutral.

The pH scale is logarithmic, which means that each unit represents a ten-fold change in the acidity or alkalinity of the solution. For example, if you have an acidic solution with a pH of four (which equals  a H+ ion concentration of 16), then the next point on the scale would be a pH of five (a H+ ion concentration of 25).

What is Acid and a Base?

Hydroxyl ions are negatively charged and work to lower the pH of a solution. Hydroxyls can be either acidic or alkaline in charge, depending on how many H+ ions around them. 

The more hydroxyl ions present, the higher the acidity will be; conversely, if there are not enough hydrogen ions to balance them out, the solution will be alkaline.

Numerical Explanation: pH is a measure of how acidic or basic (alkaline) something is on a scale from 0-14. 

On this logarithmic scale, each point represents an increase in acidity by ten times and vice versa for bases–a pH of five (an H+ ion concentration on 25).

How to use a pH Calculator?

The calculator presented here allows you to calculate what your solution’s pH is by following these steps:

Step One: Enter in values for either The value entered into this field will not appear until the next step.

Step Two: Enter the H+ ion concentration, measured as a decimal (a value of 0.01 equals one milli-equivalents per liter).

Step Three – Choose one of the three units for pH: either ppm or mEq/L or Molarity.

After you have filled in all the right information, you will find a chart that displays your solution’s pH and its H+ ion concentration.

Benefits of using pH Calculator.

-H+ concentration is measured as a decimal

-Possibility of finding the pH for three different units: ppm, mEq/L, or Molarity

-Allows for accurate calculations with easy to understand chart

Drawbacks of using pH Calculator.

NONE! This is a beneficial tool, and it has no drawbacks whatsoever.

If you are looking for a free pH Calculator tool, visit Take My Online Class website and see how it works by yourself.